✅ Fibaro HC3/HC3L
✅ Standalone
This plugin is only available in the PRO version of the automationbridge,and will bring in your alarm (areas), PIR's as motion sensors, doors/locks and any inputs/outputs defined.
Step 1 - Please click here for the setup guide of the required Inception user account
Step 2 - Select Inception from the available options.
Step 3 - Enter the IP address of the Panel (this requires to be a static IP address), the username and password that you created above in Step 1, and click Next.
Step 4 - Your account will be verified, and if successful will display the following, click Next to proceed.
Step 5 - Here you can configure the presented device type for each object within the Inception Panel, and if the object is to be setup and used with the automationbridge (Enabled setting), when done click Next.
Step 6 - Your config and settings will now be saved, click Next
Step 7 - The enabled objects will now be added to the automationbridge (and if you are using Fibaro HC3 as your base platform, these devices will also be added to it)
This completes the setup of the Plugin, click OK to return to the settings page for the plugin, from here you can perform a Sync to update any devices from the Panel (if changed) and also edit each device directly.
Now you can navigate back to the home page of the automationbridge, and enable as required for each device and smart home integration.
Please Note : If you are using Google, you will need to navigate to the Google Assistant page after enabling any 'area/alarm' click the settings icon and define a Pin code to be used, this is not required for Apple HomeKit.
And then link to each platform by following these instructions.
For Google Assistant - see this link
For Alexa - see this link
For iOS HomeKit - see this link