FAQ
You must use a 'superuser' login for accessing the Fibaro system.
Sat, 10 Feb, 2018 at 4:14 PM
Only action devices (on/off/up/down/dim etc) are shown by the bridge, if you have a device that should be shown, submit a help request using the button abov...
Sat, 10 Feb, 2018 at 4:14 PM
The bridge will refresh itself every 10 minutes against your z-wave controller, and automatically update the name in all services.
Sat, 10 Feb, 2018 at 4:15 PM
Panels are for use with wall mounted tablets (Android/iOS) where you can define a layout of buttons for your various actions, devices and scenes. These also...
Sat, 10 Feb, 2018 at 4:16 PM
All communication to and from the bridge (on your local home network) to our cloud service platform is encrypted and secured with SSL certificates. Each dev...
Tue, 8 May, 2018 at 1:02 PM
With the Home app, you can set up a home hub to control your HomeKit accessories remotely, grant access to the people you trust, and automate your accessori...
Mon, 6 Aug, 2018 at 12:17 PM
You can now setup multiple bridges to use the same email account. Please follow the below steps when setting up your subsequent automationbridge device. ...
Sun, 30 Dec, 2018 at 12:32 PM
This factory reset procedure has been added as of v0.367. It will allow you to reset your bridge, if you are unable to access it on your network due to...
Sun, 12 Jul, 2020 at 3:51 PM
With some recent firmware updates to Fibaro, your automationbridge may not be connecting to Fibaro, even though you have entered a correct username and pass...
Fri, 1 Feb, 2019 at 12:59 PM
If you find that arming Fibaro Alarm does not correctly update the automationbridge, and subsequently Homekit and/or Google Assistant, please check the foll...
Sat, 24 Aug, 2019 at 9:31 AM