✅ Fibaro HC3/HC3L
✅ Standalone
This plugin allows you to monitor network devices, and then send notifications or actions based on them going online/offline.
Step 1 - Click the Add button under the NetworkMonitor logo to begin.
Step 2 - Enter a name for the device, and its IP address (example below)
Step 3 - This device will then be checked, and if online, show a success message like so, click Next to proceed
Step 4- The device will then be created, and confirmed.
Step 5 - Click OK to proceed to the settings page, from here you can add further devices, and also edit a device should you need to make changes.
Editing a device : Timeout is the number of seconds after which it remains offline to be treated as such.
If you are using Fibaro HC3, you will find binary sensor devices have been created.
If you are using the automationbridge in Standalone mode, you will find these have been created as a 'network_sensor' device which can then be used in 'Actions' and also published to the voice platforms.
When published to the Voice services (HomeKit, Google & Alexa) it will appear as a 'Contact/Door Sensor' that is either open or closed, where Open = ONLINE and Closed = OFFLINE.