If your automationbridge PRO does not automatically power on after a power failure, you can follow the below steps to enable this feature.
Step 1 - Power down the automationbridge PRO.
Step 2 - Connect a monitor to the HDMI port and a keyboard to the USB port.
Step 3 - Power on the unit, and then quickly and repeatedly press the DELETE key.
Step 4 - This will then get you into the BIOS of the unit
At this point please check the Year at the top of the screen if this says 2021 then use the following steps, if it says 2022 then skip down to the following 2022 section.
2021 Version
- Using the arrow keys, move to the Chipset menu, and then to the South Bridge menu and press Enter.
- Select the Restore AC Power Loss option, and then change this to be Power On
- Now navigate back by press ESC and then select the Save & Exit menu item, then Save Changes.
The unit will now power back on, and also now after any power failures, will auto start.
2022 Version
- Using the arrow keys,navigate to the Advanced menu, then choose, IT8613 Super IO Configuration
- Next navigate to the Restore AC Power Loss by IO option, and change this to be Power On
- Now navigate back by press ESC and then select the Save & Exit menu item, then Save Changes.
The unit will now power back on, and also now after any power failures, will auto start.