✅ Fibaro HC3/HC3L
✅ Standalone
This guide assumes that you have already setup your Nuki Smart Lock and WiFi Bridge on the network, it must also be assigned a static IP address.
Step 1 - Click the Add button under the Nuki logo to begin.
Step 2 - You will need to ensure that the HTTP API is enabled on your Nuki bridge via the Nuki app, opening the burger menu > Manage my devices > Bridge and then select the bridge to enter its settings, and enable and retrieve the required token, for example
Step 3 - on the automationbridge plugin setup page, select the matching Nuki bridge and enter the token retrieved in the step above, and then click Next
Step 4 - The automationbridge will then connect to the Nuki bridge, verifiying your token, and if successfull the following will be displayed, click Next to proceed.
Step 5 - The Nuki lock(s) will now be added to your Fibaro controller as a door lock.
This completes the setup of the Nuki plugin, you will now be at the plugin settings page, here you can add additional bridges/locks, and perform a sync to update with existing bridges.
In your Fibaro controller, you will have corresponding lock objects, eg.
