Settings for Hikvision Cameras : Skaro Technology

Settings for Hikvision Cameras Print

Created by: Skaro Technology Support

Modified on: Thu, 6 Aug, 2020 at 12:48 PM

In order to use Hikvision cameras with the IP Camera plugin, we suggest the following settings, otherwise the camera will not be able to be accessed.

Hikvision-CGI must be enabled.

HTTPS must be turned off

The following network services must be enabled as shown below.

If you are going to use the Hikvision cameras with HomeKit, we also recommend the following settings

Skaro is the author of this solution article.

Did you find it helpful? Yes No