Fibaro HC2
✅Fibaro HCL

* Before you being this process, please ensure that you have connected your Bose Speakers to your home network.

This guide assumes that you have already purchased the SBose plugin from within the automationbridge interface. Also note this plugin will only work if your Bose speakers are on the same subnet (network) as the automationbridge. This plugin will not work across different VLANS/subnets.

Step 1 - Click on the Add button under the Bose icon on the plugins page.

Step 2 - The automationbridge will now scan your network for the available speakers.

Step 3 - When all available devices have been found, you will be presented with a list, click Add on the device you wish to add (if you have multiple devices, just click Add on the first one, and then you can add the others later)

Step 4 - The selected speaker will now be added to the bridge, and your Fibaro Controller.

You will now find that you have a new VD in Fibaro

Click OK to proceed to the main Bose plugin settings page, from here you can delete and add additional speakers.

If you make any changes to the Bose device, eg renaming it or adding/removing presets, just click the Sync button and all speakers will be updated in your Fibaro controller.